How to Read an Allulose Certificate of Analysis

Release time:

Nov 08,2026

Author:

Zhongda

Source:

Zhongda


An allulose certificate of analysis should connect an identified batch to interpretable results and the specification agreed for that material. The useful review starts with three questions: does this certificate belong to the received lot, does it use the right requirements, and do its results support the purchasing decision?

Zhongda Hengyuan combines dedicated allulose manufacturing with factory QC reporting, technical consultation and third-party reporting options including SGS. That combination gives procurement and quality teams a practical way to discuss the evidence needed from qualification through delivery. Our powder, granular, syrup and customized-blend portfolio makes precise grade and batch identification essential. Explore Zhongda's D-allulose portfolio.

Exterior of the Zhongda Hengyuan D-allulose production facility

Figure 1. Zhongda Hengyuan D-allulose production facility.

Put each quality document in its proper role

A specification defines requirements for a grade. A batch COA reports results or conformity associated with an identified lot. A representative COA shows the reporting format during qualification; it does not establish the status of another delivery.

Zhongda also has a supplier-specific public technical record. FDA's response to GRN 001309 describes our D-allulose specifications and analyses of three non-consecutive batches each of the syrup and crystalline powder described in that record. This supports the manufacturing and ingredient qualification discussion. A purchaser still needs documents linked to the actual proposed or received lot. FDA's response to Zhongda's GRAS notice.

Manufacturing-system and product credentials have their own roles. Zhongda's FSSC 22000 certificate includes allulose production within its named Linying site's scope, and Non-GMO Project documentation names the Sweetism powder, granular and syrup products separately. Those records support the relevant site or product review alongside the COA; they do not report an individual shipment's analytical results.

Read the identity block before the assay result

Begin with the purchase order, package label and certificate together. Match the product code, form, manufacturer and batch. If a distributor or warehouse uses a different lot code, obtain the documented relationship to the original manufacturing lot.

A high assay result is useful only when the result belongs to the material being assessed. Similar dates or nearly identical lot numbers are not enough to establish that link. The following checklist can be used for a representative document review and adapted for receiving inspection.

COA field What to establish A clarification to resolve
Product and issuer Name, grade, form, issuing entity and relevant manufacturing relationship Generic allulose wording for an order that specifies a particular powder or blend
Batch and dates Lot matches the label; production, analysis, issue and expiry or retest dates have defined meanings An unexplained relabeling code or ambiguous date format
Specification Applicable identifier, revision, acceptance criteria and reporting basis Limits that differ from the purchasing specification
Results and methods Units, qualifiers, method references and conditions needed for interpretation A numerical field showing only an unexplained pass, or a result without its basis
Authorization Certificate identifier, approval or verification route and revision history An edited document the issuing contact cannot confirm

Some supporting details may sit in an approved method or specification rather than on the certificate itself. Keep those linked records retrievable. A compact COA can still be useful when its meaning is clear and the agreed evidence is available.

Compare the result with the requirement on the same basis

A specification limit defines what is acceptable; a result reports what was found or established for the identified batch. A printed maximum of 1.0% and a result of 0.30% are different kinds of information. An entry repeating the maximum in the result column may instead be a conformity statement that needs explanation.

Preserve dry-basis and as-received descriptions. An assay expressed relative to dry material cannot be compared directly with an as-supplied requirement without compatible composition data and methods. Syrup needs its solids and composition context; a blend needs the composition of the offered system. The name HPLC alone does not establish whether a percentage is calibrated mass fraction or chromatographic area.

Keep qualified results intact. A value reported as less than a threshold does not mean zero. Eurachem's analytical-method guide explains that a not-detected statement needs its detection-limit context. Microbiology also needs the unit or test portion: absence in 25 g describes a different finding from a count in CFU/g. Eurachem guidance on analytical reporting.

For a result close to an acceptance limit, have the responsible quality reviewer consider the method information, measurement uncertainty and agreed decision rule where relevant. A buyer should not create extra decimal places or remove qualifiers to make a comparison appear simpler.

Work through a certificate that needs clarification

The following is an invented training example. Its identifiers, specifications and results are not Zhongda data or a real shipment.

Assume the order requires powder grade AP-04 against specification revision 3. The received package shows lot TRAIN-A, but the certificate contains these entries:

Certificate entry What the review establishes Appropriate next step
Lot TRAIN-B The certificate and package identify different lots Establish the correct relationship and obtain the applicable authorized certificate
Specification AP-04 revision 2 The certificate references an earlier revision Compare changed requirements against the agreed revision 3
Allulose minimum 98.5% dry basis; result 99.1% dry basis The printed assay requirement is exceeded on the stated basis Continue the complete review; this row does not settle the lot or revision mismatch
Lead maximum 0.10 mg/kg; result less than 0.50 mg/kg The reporting threshold is too high to demonstrate the purchasing limit Obtain suitable supporting evidence; the entry alone proves neither conformity nor failure against 0.10 mg/kg

A favorable result in one row cannot compensate for the wrong lot or specification. Record the unresolved question and assign it to the supplier contact, laboratory or internal quality reviewer who can answer it. The receiving decision should follow the resolved evidence.

Agree how the required evidence will be generated

Identify which characteristics are tested on the lot and which are supported by another documented control or periodic program. A blank field does not automatically prove that a characteristic is uncontrolled; it identifies a question about the evidence supporting the agreed requirement.

Zhongda's factory QC and third-party report options allow this discussion to be tied to the project. Specify the analytes, methods, reporting limits, sample identity and timing required by your quality procedure. If SGS or another independent laboratory is needed, agree the actual work and report before the purchasing stage that depends on it.

Zhongda's quality-control capabilities include a CNAS-accredited QC center. For accredited testing, agree the relevant laboratory and method scope with our team. The scope for a particular analysis matters more than a general accreditation reference.

This planning also helps customized products. Zhongda supports allulose form, packaging and specification customization, with formulation consultation for sugar-reduction and clean-label projects. When a blend or specification changes, identify the resulting grade and the records needed to qualify it.

Keep the lot and its decision connected through receipt

Before purchasing, agree the approved grade, specification revision and required shipment documents. At receipt, link the COA to the purchase order, package label and incoming record. Record the reviewer, date, discrepancies and decision so warehouse and purchasing colleagues can see the material's status.

Palletized packaged goods on racks in Zhongda Hengyuan allulose finished goods warehouse

Figure 2. Zhongda Hengyuan allulose finished-goods warehouse.

If the issuer corrects a certificate, retain the original and authorized replacement with the revision reason and affected lot. Reassess any earlier decision affected by the correction. Use an established supplier contact to verify a questionable file; the buyer should request an authorized correction to supplier data.

Zhongda's National Enterprise Technology Center and manufacturing organization provide a technical foundation for this continuing supplier relationship. Bring your required report format, methods, limits and review timing into the initial discussion so development, quality and procurement can work from the same product description.

Send the Zhongda team your preferred allulose form, application, destination market, trial stage and anticipated purchasing volume. Include the specification and COA fields your quality procedure requires, plus any organic, Non-GMO, Halal or Kosher requirement for the proposed grade. Discuss allulose quality documents with Zhongda.


Sample Request

* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.

Submit