Allulose Powder Specifications for Food Ingredient Buyers

Release time:

Nov 07,2026

Author:

Zhongda

Source:

Zhongda


Allulose powder specifications should tell a food manufacturer what it is buying, how the material will be measured and whether the agreed grade fits its process. The useful comparison covers composition, assay basis, moisture, handling properties and quality requirements together. A single purity number leaves too much of that decision open.

Zhongda Hengyuan brings dedicated allulose manufacturing, formulation support and a supplier-specific U.S. GRAS record to this discussion. Our allulose line is designed for round-the-clock operation, supported by an ingredient business with a National Enterprise Technology Center. We can discuss powder, granules and customized sweetener systems against the requirements of your finished product. Explore Zhongda's D-allulose portfolio.

A bowl of white allulose powder in a client supplied product illustration

Figure 1. Allulose product illustration supplied by Zhongda Hengyuan.

Begin with Zhongda's published technical record

FDA's response to Zhongda's GRAS notice, GRN 001309, provides a concrete public reference for our D-allulose business. The letter describes the following specifications submitted for crystalline powder. They are specifications described in that regulatory record, rather than a current sales specification or a shipment COA.

Characteristic Powder specification described in GRN 001309
D-psicose, also called D-allulose At least 98% on a dry-weight basis
Fructose No more than 0.5% on a dry-weight basis
Glucose No more than 0.5% on a dry-weight basis
Moisture No more than 1.0%
Ash No more than 0.5%
Lead, arsenic, cadmium and mercury No more than 0.1 mg/kg for each element
Salmonella serovars Absent in 25 g

FDA issued a no-questions response on 6 July 2026 for Zhongda's GRAS conclusion under the notice's intended conditions of use. This supplier-specific record gives buyers a meaningful starting point for qualification; the proposed grade still needs an agreed commercial specification. Read FDA's response to Zhongda's notice.

Identify the grade before comparing percentages

State the product code, composition, manufacturer and production site at the top of the purchasing specification. A single-ingredient powder and a blend with stevia or monk fruit require different descriptions. An assay for the allulose component does not describe the complete composition of a sweetener system.

Zhongda customizes allulose form, packaging and specification, supported by technical consultation and formulation development. Define the required grade before testing it against your process.

Turn a product description into measurable requirements

Use the following matrix to build the purchasing document. It is a review framework, not a separate set of Zhongda limits.

Field Define in the specification Decision it supports
Identity and composition Grade code, ingredient composition and relevant identity method Whether the quotation, sample and ordered ingredient describe the same material
Assay and related sugars Acceptance limits, units, method and dry or as-supplied basis Whether composition values can be compared and used in a formulation calculation
Moisture and other quality tests Named test, limit, units and method reference Whether laboratories are measuring the same characteristic
Particle and handling properties Relevant sieve or distribution method; agreed flow, dissolution or handling assessment Whether the powder can be introduced through the intended plant process
Microbiology and contaminants Analytes, limits, units, test portions and methods Whether the evidence supports the defined quality requirements
Packaging and document control Pack construction, storage, supported shelf life, revision and change arrangements Which material and requirements repeat orders will cover

Product claims need the appropriate supporting records. A Non-GMO verification addresses product status; the manufacturing-system certificate and batch COA address different qualification questions.

Interpret dry-basis assay before calculating ingredient contribution

A dry-basis result refers to the defined dry portion. An as-supplied mass fraction describes the delivered material on the stated weight basis. Two offers cannot be compared by their percentages alone if their reporting bases differ.

Consider a hypothetical powder containing 99.0% allulose by weight on a dry basis and 0.50% water by weight. Assume compatible methods and definitions. In 100 kg of supplied powder:

  • Dry material is 100 × (1 − 0.005) = 99.5 kg.
  • Allulose is 99.5 × 0.990 = 98.505 kg.
  • Other dry material is 0.995 kg, with 0.500 kg of water.

The as-supplied allulose mass fraction is therefore 98.505%. These invented values explain the calculation; they are not Zhongda specifications or recommended acceptance limits.

Use a confirmed weight-based composition for this calculation. An unqualified HPLC peak-area percentage does not establish that mass fraction. Also keep moisture and loss on drying distinct: USP describes loss on drying as volatile matter removed under specified conditions, which can include substances other than water. USP explanation of loss on drying.

Specify particle properties around the factory process

Terms such as crystalline, fine and free flowing help describe a powder, but they do not define a reproducible particle requirement. If particle size affects feeding or blending, identify the measurement method and reporting basis.

For a sieve requirement, define the aperture or sieve standard, percentage passing or retained and procedure. For laser diffraction, agree the sample preparation, distribution basis and reported parameters. Dv50 is the median of a volume-based distribution; Dv10 and Dv90 help describe the finer and coarser portions. A median alone does not describe the whole powder. HORIBA particle-distribution guidance.

Connect those measurements to an actual process requirement. For a dissolution step, define liquid composition, concentration, mixing, temperature and endpoint. For a dry blend, examine feeding, transfer and segregation under the intended conditions. This keeps the specification useful without adding tests that do not inform the purchasing decision.

Use Zhongda's manufacturing and quality capabilities

Zhongda connects specification development with dedicated allulose manufacturing, quality systems and application support.

Processing equipment and pipework inside Zhongda Hengyuan allulose plant

Figure 2. Processing equipment inside Zhongda Hengyuan's allulose plant.

Our FSSC 22000 certificate identifies the Linying production site and includes allulose crystalline powder, granular material and syrup in its production scope. Our Non-GMO Project documentation also names Sweetism Allulose Crystalline Powder separately from the granular and syrup products. These provide specific records for the manufacturing-site and product reviews, alongside the technical specification.

Zhongda offers factory QC reports and third-party reporting options including SGS. Bring your required tests, methods and reporting limits into the discussion early so the reporting arrangement can fit the grade and approval stage. Where laboratory accreditation is required, identify the relevant method and capability scope.

Our formulation support can also connect the powder requirement with a sugar-reduction or clean-label objective. Define the ingredients and declarations your brand accepts, target sweetness and texture, and process constraints. The resulting proposal should address both the ingredient specification and the finished-product trial. Zhongda's manufacturing and research background.

Approve the specification that repeat orders will use

Finish the review by identifying the selected grade, site and specification revision. Keep the approved sample and application result linked to those records. Agree which batch documents accompany a shipment and how changes to composition, particle treatment, source or specification will be communicated.

If a trial used revision 3 while an order references revision 2, compare the actual changes before recording approval. A satisfactory assay result does not establish that every requirement in the intended revision has been addressed.

Send Zhongda your application, destination market, preferred composition, handling conditions and expected purchasing volume. Include essential analytical methods, packaging requirements and any organic, Non-GMO, Halal or Kosher requirement so the proposed grade can be matched with its applicable records. Discuss an allulose powder specification with Zhongda.


Sample Request

* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.

Submit