Allulose Packaging Options for Pilot and Bulk Orders

Release time:

Nov 17,2026

Author:

Zhongda

Source:

Zhongda


If a pilot uses 12 kg per run, a 25 kg bag leaves 13 kg to manage after opening. A line taking several hundred kilograms each shift faces repeated bag opening instead. The better bulk allulose packaging choice depends on the draw size, time between runs and equipment at the dosing point.

Zhongda offers customization of allulose form, packaging and specification across its powder, granule and syrup range. For a packaging proposal, send the amount drawn per run, the interval between draws and the largest gross unit your site can handle. Those details let our team discuss the trial pack and the later bulk format against the same operating brief. Zhongda's D-Allulose range.

Match the pack to the point of use

Follow the package from the receiving dock to the dosing point. Where it is moved, sampled, opened, emptied and weighed sets requirements for lifting, dust control and connections. Resolve the unloading route before selecting a pack by price and net weight.

Pack type to discussWhere it can fitCheck before ordering
Small sealed dry unitsBench or pilot runs using a measured amount with time between runsIs the trial material the same grade and form as the future production order? Can each unit be used in one run or resealed under an approved procedure?
Lined bags on a palletWeighed powder or granule addition at a bag dump stationNet and gross mass per bag, inner liner and closure, operator handling assessment, pallet pattern and bag opening method
Dry bulk bag, or flexible intermediate bulk container (FIBC)Repeated dry dosing with a compatible bulk bag stationGross load, rated lifting and support, liner, discharge spout dimensions, dust controls and any plan for partial discharge
Sealed pail, drum or liquid IBCPilot or plant transfer of allulose syrupTare and net fill, valve and fitting, pump compatibility, expected viscosity at unloading temperature, and treatment of residual syrup

These are candidate formats to discuss for the selected grade. The proposal should identify the available net fill, pack drawing and handling instructions. For a bulk bag, the plant reviews the lifting and discharge setup with those instructions. For syrup, a fitting drawing or photo and the hose and pump cleaning routine give the supplier concrete connection requirements. FIBC trade association handling guidance.

Wrapped pallet loads on racks in Zhongda's allulose finished goods warehouse

Figure 1. Palletized goods in Zhongda's allulose finished goods warehouse.

Count what you will open and what you will leave behind

Suppose a pilot needs three 120 kg draws of powder on separate days. The site has no approved carryover procedure for opened packs. Compare two hypothetical pack sizes at the same total draw of 360 kg.

Pack size in this exampleUnits opened over three runsOpened-pack remainder
10 kg12 per run, 36 in totalNone from pack sizing, before routine handling losses
25 kg5 per run, 15 in total5 kg per run, 15 kg in total

The 25 kg option removes 21 bag openings but leaves 15 kg across the three runs. Its value depends on what happens to that remainder. If the site can approve carryover within the planned interval, calculate the result again. Receiving time, opening time, partial handling and unusable residue all belong in the comparison.

For syrup, the usable quantity depends on what remains in the vessel and transfer line. A quote by volume needs density and temperature assumptions before it can be compared with a quote by net mass. For dry shipments, the receiving team needs gross pallet mass and loaded dimensions. Sum the gross pack masses plus the pallet and any additional unitization material, then compare that load with the site's storage and handling limits.

Put the packaging specification on the order

The pack description should identify the contact layer, outer structure, closure and label. With a lined bag, an independently sealed liner and a defined opening method affect moisture protection and the risk of fragments entering the feed. For syrup, describe the cap or valve seal and connection. The food contact review needs the material identity, intended conditions of use and evidence applicable to the destination market. FDA guidance on food contact material components.

The selected grade's TDS and proposed pack establish the storage conditions and unopened shelf life. Put those conditions and the minimum remaining shelf life at arrival on the order. Any carryover of opened packs needs its own approved procedure. On the label, review the manufacturer and lot code, net contents, relevant dates and storage instructions together. A pallet containing multiple lots also needs a clear link between each unit, the packing list and its COA.

Zhongda's Non-GMO Project documentation lists Sweetism crystalline powder, granular allulose and syrup as separate products. The company also maintains Halal and Kosher certification documentation, and its published allulose announcement reports USDA Organic certification. For a project using one of these marks, the artwork approval needs the current product schedule for the offered grade and permission to reproduce the mark. Zhongda's allulose certification announcement.

At first receipt, compare the delivered unit with the approved drawing and order. Photograph damage, leakage or unexpected closure differences and route the affected material to quality for disposition. The supply agreement should also cover notification of liner, closure, valve or pallet changes that could alter opening, storage or transfer procedures.

Move from the pilot pack to the bulk order

Zhongda's dedicated automated allulose line is designed for 24-hour continuous operation. The FSSC 22000 certificate on file for the Linying site lists allulose powder, granules and syrup within its production scope. These manufacturing records can be reviewed with the proposed grade and pack, so the team approving a pilot knows which supply arrangement the trial is intended to represent.

Zhongda is listed in China's 2018 National Green Factory record. For a packaging waste review, compare the mass and material of each pack component, expected product losses and the disposal or recycling routes available at the receiving site. Those figures give the environmental review a defined pack and transport route to assess. MIIT Green Factory list, entry 249.

Exterior of Zhongda's D-allulose production facility

Figure 2. Zhongda Hengyuan D-allulose production facility.

A small sealed sample can support the first formulation trial. When the bulk format changes, a short unloading trial establishes handling time, product loss and feeding behavior with that pack. Keep the grade, lot and specification revision traceable, and decide which operations need repeating before the commercial order. Zhongda's allulose sample trial guide.

Include the following packaging fields in the RFQ so production and receiving can review the returned proposal together.

Put in the RFQAsk the supplier to return
Allulose form, grade and destinationSupplying site and offered grade, with separate pilot and bulk pack descriptions
Total pilot and bulk quantities, draw size and time between drawsNet fill, gross unit mass, closure and any supported conditions for opened units
Handling and storage limits, including pallet footprint and dosing connectionPack drawing, gross pallet mass and dimensions, outlet or liner details
Required arrival shelf life, label marks and food contact evidenceUnopened storage and shelf life, representative label, lot mapping and applicable documentation

Request an allulose sample and packaging proposal from Zhongda.


Sample Request

* Note: Make sure you fill in the information accurately and keep the communication open, we will contact you as soon as possible.

Submit