How to Test Natural Antioxidants for Food Preservation
Release time:
Nov 16,2026
Author:
Zhongda
Source:
Zhongda
When cooked chicken picks up a stale smell on reheating, use that defect to plan the trial. Test the natural antioxidant in the chicken you make, under the same cook, pack and chill conditions. Does the off-note appear later? That's the result you need before choosing a candidate for food preservation.
Zhongda’s natural antioxidant range includes rosemary extract in oil-soluble and water-soluble forms and a water-soluble tea polyphenol powder. Where you can add the ingredient on the line is one of the first things to discuss. A sample that’s easy to disperse in the lab may behave differently when it’s pumped into an oil tank or mixed into a brine.
Decide what failure looks like in your food
For the chicken, start with the aroma after a standard reheat. Record what the stale note smells like, when it first appears and what score would make the product unacceptable. A lab can also measure thiobarbituric acid reactive substances (TBARS) in the meat. Pair the result with a blind sensory check because the number and the eating experience can tell different stories. A study on vacuum-packed minced pork found that the rosemary form with the strongest lipid oxidation result differed from the one with the best sensory result under its test conditions.
The same test won’t suit every product. Choose a measure that follows the defect your team has observed and have the lab confirm the method works in that food.
| Food and reason for the trial | What to follow during storage |
|---|---|
| Edible oil develops a rancid smell | Peroxide value tracks early oxidation. Add a suitable secondary measure, such as p-anisidine value for the oil, and check aroma. |
| An oil-in-water dressing develops a stale note | Follow the sensory change and agree on a chemical marker the lab can measure in the emulsion, such as hexanal when appropriate to the oil. |
| Cooked poultry tastes stale after reheating | Score aroma and flavor after a standard reheat and consider TBARS alongside the sensory scores. Record the cook, pack and chill conditions. |
Peroxides can break down as oxidation progresses. That’s why a low peroxide value late in storage can be misleading on its own. A soybean oil study followed hydroperoxides and hexanal over time. A mayonnaise study also measured peroxide value alongside secondary indicators such as hexanal. For your product, let the actual defect determine which results matter most. Keep the microbiological shelf-life evaluation separate.
Put the dose on the same basis
Ask for the exact grade, carrier or dispersing aid, marker content, test method and whether that result is expressed as supplied or on a dry basis. For rosemary extract, ask whether the reported marker is carnosic acid alone or the sum of carnosic acid and carnosol. A label like “200 ppm rosemary” leaves room for two people to run quite different trials.
For example, 2.0 g of a hypothetical extract with 10% marker by weight as supplied contributes 200 mg/kg of extract and 20 mg/kg of marker to a 10.0 kg finished batch. Those numbers illustrate the calculation only. Write down the weight basis as well. EU entries for certain uses of rosemary extract (E 392), for instance, can express limits as the combined marker amount on a fat basis. Have your regulatory team check the current rule for the food category and destination before setting doses. EU example for a specific category of spreadable fats.
Set up the comparison before you order samples
Run the base recipe without the trial antioxidant and keep the current commercial formula as a reference if you’re replacing an existing ingredient. Compare two feasible doses of the candidate, chosen with your technical and regulatory teams. Use the same starting fat, cook profile, pack, headspace and storage conditions across samples. If the candidate brings enough carrier to affect the recipe, account for it in the control. An oxygen-barrier packaging change deserves its own comparison so you can see what the ingredient contributed.
Make the first reading after processing, then sample around the point where the control usually starts to fail and at the end of the intended shelf life. Use separate sealed packs for each destructive sampling point. A small accelerated screen can narrow the shortlist. Confirm the selected formula under the intended storage conditions in the final pack before setting a shelf-life claim.
If a candidate improves the lab result but adds an herbal note the panel can pick out, try a different grade or a lower dose. If none of the controls develops the stale note, the trial hasn’t recreated the problem. Check the fat lot, pack and storage conditions before drawing a conclusion about the ingredient.
Zhongda's FSSC 22000 certificate for Linying lists both rosemary extract and tea polyphenol. The company also lists a CNAS-accredited laboratory. If your QA team needs a result from an accredited method, check the laboratory's current scope for that method and sample type before relying on the report.
For a rosemary or tea polyphenol sample, tell us when the flavor goes off and where you can add the ingredient on your line. Add the pack, storage conditions and destination market. If QA already uses an oxidation test, include the method so we can discuss the right documentation for the proposed grade.
Recommend News




